GE CDT865SxJ0 Series Technical Service Manual

Contents

GE CDT865SxJ0 Series Technical Service Manual Manual pdf 10 page image

– 10 –NOTE:The above table is for exposed heater models.2Q+LGGHQ+HDWHUPRGHOVWKHKHDWHULVRȹDQGGRHVQRWRSHUDWHGXULQJGU\7KHpower fan is in operation during Power Dry.Cycle TimesTimes will vary depending on options selected,incoming water temperature (120°F - 140°F isrecommended), and soil level.This section of the guide provides details on segments of cycles, timing of cycles, temperature expectationsand cycling of the heater.Auto Hot StartIf incoming water temperature is below 80°F, Auto Hot Start is initiated at the beginning of the cycle in anattempt to purge the home water lines of cooler water. Auto Hot Start can add up to 10 minutes to overallF\FOHWLPH2QH$XWR+RW6WDUWVHJPHQWLQFOXGHVDPLQXWH¿OOPLQXWHFLUFXODWHDQGVHFRQGGUDLQrepeating this sequence if the 80°F temperature is not met. The dishwasher can repeat this up to 3 times ifQHHGHG,IWKHWHPSHUDWXUHLVPHWLQRQHRUWZRVHJPHQWVWKHF\FOHDGYDQFHVWRWKH¿UVWSUHZDVKVHJPHQWof the cycle.Operation and Cycle Information4 Pass Exposed Heater Algorithm, Dry CycleNormal with Heated DryTime (minutes) Calrod Description6 Calrod on28 &DOURG3XOVHPLQXWHRQPLQXWHRȺ14 &DOURGRȺ&RRO'RZQNormal with Temp Boost or Sani Selected6 Calrod on58 &DOURG3XOVHPLQXWHRQPLQXWHRȺHeated Dry Element Algorithm (Exposed Heater Models)Rinse 15 minutesExpress 30 - 51 minutesLight 54 - 104 minuteseWash 62 - 212 minutesNormal 77 - 181 minutesAuto 111 - 201 minutesHeavy 150 - 221 minutesThe Cycle Times table considers soil level and dryoptions. Times will vary depending on turbidityresponse and incoming water temperature.The Cycle Times table does NOT consider the belowRSWLRQVDQGKRZWKH\DȺHFWF\FOHWLPH• Selecting the Wash Temp option(s) will addup to 24 minutes to the cycle and increasetemperatures 5°F.• The Steam option adds a Pre-Wash segment toincrease temperature.• The Bottle Wash option will increase the cycletime, adding up to 23 minutes; water usagedoes not change.• The Sani option increases temperature of someCirculations 5°F and changes Final Rinse toSanitizing Rinse with 153°F target.