GE CDT865SxJ0 Series Technical Service Manual

Contents

GE CDT865SxJ0 Series Technical Service Manual Manual pdf 78 page image

– 78 –The Mid-level Conduit supplies water from the mainconduit to the mid spray arm and bottle washfeature (some models). All models have adjustableracks. An adjustable conduit is used to allow properengagement of the main conduit to the mid conduitin both rack positions.To the remove Mid Conduit, push on the tab andslide the conduit to the back of the rack.Middle Spray ArmThe Mid Spray Arm provides an upward directedspray pattern to the upper rack. To remove the midspray arm, turn the nut clockwise (looking downthrough the upper rack).Middle ConduitPush tab to release conduitClean Sweep Jets Middle Spray Arm has 2counter rotating components available as onepart. The base portion of the assembly has acounterclockwise rotation (as viewed from above)and has a paddle appearance (shown as a shadedpart). The three wing appearance portion of theassembly rotates clockwise (as viewed from above)the spray arm is internally gear driven.Clean Sweep Jets Middle Spray Arm Model(PDT846SSJ only)The three wing part of the assembly is mounted tothe base assembly and not centered to the rack. Itwill have an elliptical rotation allowing the spraypattern to position spray jets to each corner of theupper rack.The assembly mounts to the middle conduit withthe same style twist lock nut as other models in thisguide. To remove, turn the mounting nut clockwiseas looking from above and counterclockwise toinstall.(Continued next page)