– 61 –The air gap allows air to enter into the tub duringthe dry portion of the cycle. It is located on the leftside of the dishwasher tub, and must be removedfrom the installation to access. Remove by turningthe mounting nut counterclockwise from the insideof the tub.The air gap may now be removed from the outsideof the tub. There is a gasket between the air gapand the tub.The Flood Float is located in the sump. The FloodSwitch is located on the underside of the sump. ItZLOORSHQWKH¿OOFLUFXLWVKRXOGZDWHUUHDFKDQHDUÀRRGFRQGLWLRQFlood Switch RemovalIf the dishwasher is installed with the level legsextended, the 1/4 in. hex head screw may beremoved without removing the sump.1. Remove power to the dishwasher.2. Remove the toe kick.3. 5HPRYHWKHÀRRUSURWHFWLRQSDQ ZKHUHapplicable). See the Floor Protection Pansection of this service guide.4. 6RPHLQVWDOODWLRQVPD\DOORZÀRRGVZLWFKremoval without removing the sump (see SumpModule Removal section of this service guide, ifneeded).5. 7KHÀRRGVZLWFKPD\QRZEHUHPRYHGE\removing the 1/4 in. hex head screw.Flood Float and Switch Air GapSumpFloodSwitchMountingScrew
