GE CDT865SxJ0 Series Technical Service Manual

Contents

GE CDT865SxJ0 Series Technical Service Manual Manual pdf 41 page image

– 41 –The sump module is front serviceable with thedishwasher remaining in the installed location. Thissection of the service guide only covers the sumpremoval. Components and diagnostics of the sumpmodule may be found in the Fill System, CirculationSystem or Drain System sections of this serviceguide.Sump Module Removal1. Remove power to the dishwasher.2. Remove the upper and lower racks.3. Remove the toe kick.4. Remove the door (see Door Removal in theDoor section of this service guide).5. Remove the lower spray arm (see Lower SprayArm and Conduit section of this service guide).6. 5HPRYHWKHXOWUD¿QH¿OWHU D WZRYHQWFDSV E ¿QH¿OWHU F PDLQFRQGXLW G VLOYHUZDUHFRQGXLWH DQGÀRRGÀRDW I 7. Remove the main conduit (see the CirculationSystem section of this service guide).High Drain Loop HoseDisconnect Turbidity Sensor Harness(Continued next page)Sump Module 8. Loosen the high drain loop hose clamp (1/4 in.hex head) and remove the hose from the drainpump (there will be a small amount of water inthe sump, pump and hose).9. Disconnect the turbidity sensor wiring (somemodels).10. Unlatch three sump clips. All three latches canbe reached from the front of the dishwasher inmost installations. If the dishwasher does nothave the legs extended, the dishwasher mayhave to be removed from its installed position.acd efbb