GE CDT865SxJ0 Series Technical Service Manual

Contents

GE CDT865SxJ0 Series Technical Service Manual Manual pdf 35 page image

– 35 –ComponentsBar HandleThe Bar Handle is attached to the outer door panel.The handle is an assembly with end caps pre-attached.Bar Handle Removal1. Remove and separate the door.2. Remove two 3/8 in. hex head, 1/4 -28 thread sizescrews holding the handle.Top Control Console Cover Removal1. Remove and separate the door.2. Remove the bottom cover, UI, light pipe andbuttons.3. Remove the top console and cover as anassembly. There are six 1/4 in. hex head screws,securing the assembly to the inner door (notethe length of the screws). A new cover shouldbe replaced in the event the cover is loose ormust be removed. The tabs are likely to break onremoval.New Top Cover Installation1. The top cover is secured with sixteen tabs, andthe console has cutouts or slots to allow the topcover to click lock together.2. Position the tabs on the cover into the slots onthe console.3. Press the top and console securely together andslide the parts to engage the tabs into the slots.Start from one end and work across to the otherHQG$VHULHVRI¿YHDXGLEOHFOLFNVZLOOEHKHDUGas the cover and console snap together.Six 1/4 in. hexhead screwsTo remove hinges from the outer door panel,remove six 1/4 in. hex head screws.Top Control Console Cover Outer Door PanelHingesLensHandleHandle ScrewsHandle BracketsHinge ScrewsHingesBadge