GE P24DM Technical Manual

Also see for MiCOM P40 Agile: Technical manual Technical manual Technical manual Technical manual Technical manual

● crv is the Curve group number (1, 2, 3, 4)● n is the new access level (0, 1, 2, 3)● p is the password level (1, 2, 3)● nov is the number of events (1 – nnn)Each new event has an incremented unique number, therefore missing events appear as ‘gap’ in the sequence.The unique identifier forms part of the event record that is read or uploaded from the IED.Note:It is no longer possible to clear Event, Fault, Maintenance, and Disturbance Records.4.8 LOGGING OUTIf you have been configuring the IED, you should 'log out'. Do this by going up to the top of the menu tree. Whenyou are at the Column Heading level and you press the Up button, you may be prompted to log out with thefollowing display:DO YOU WANT TOLOG OUT?You will only be asked this question if your password level is higher than the fallback level.If you confirm, the following message is displayed for 2 seconds:LOGGED OUTAccess Level #Where # is the current fallback level.If you decide not to log out, the following message is displayed for 2 seconds.LOGOUT CANCELLEDAccess Level #where # is the current access level.Chapter 17 - Cyber-Security P24xM380 P24xM-TM-EN-2.1