GE P24DM Technical Manual

Also see for MiCOM P40 Agile: Technical manual Technical manual Technical manual Technical manual Technical manual

3.1 NAVIGATING THE HMI PANELThe cursor keys are used to navigate the menus. These keys have an auto-repeat function if held downcontinuously. This can be used to speed up both setting value changes and menu navigation. The longer the key isheld pressed, the faster the rate of change or movement.The navigation map below shows how to navigate the menu items.V00400Alarm messageColumn 00System dataLast ColumnDefault displayoptionDefault displayoptionDefault display optionsSubsequent column headingsRow 01LanguageRow 01Subsequent rows Subsequent rowsVertical cursor keys movebetween setting rows Horizontal cursorkeys movebetween valueswithin a cellThe Cancel keyreturns tocolumn headerFigure 15: Navigating the HMI3.2 GETTING STARTEDWhen you first start the IED, it will go through its power up procedure. After a few seconds it will settle down intoone of the top level menus. There are two menus at this level:● The Alarms menu for when there are alarms present● The default display menu for when there are no alarms present.If there are alarms present, the yellow Alarms LED will be flashing and the menu display will read as follows:Alarms / FaultsPresentHOTKEYChapter 5 - Configuration P24xM58 P24xM-TM-EN-2.1