Chapter 5. Logging Data86 Model PM880 Portable Hygrometer User’s Manual5.6 Viewing Log Setup DetailsThe PM880 enables you to view more than the log details shown in LogManager. The Details command enables you to see the log status, date andtime, length, interval, types of measurements logged and serviceinformation.5.6.0a Accessing the Log Manager1. If the menu is not active, press [MENU].2. Use the arrow key to scroll to Logging and press [ENTER].3. Use the arrow key to scroll to Log Manager and press [ENTER].5.6.0b Selecting a Log1. Use the arrow key to scroll to the desired log. Logs are associated withthe site file in use at the time the log is created or run. If you do not seethe desired log in the list, refer to Viewing All Logs on page 85 to displayall the existing logs.Note: The list of log files in the Log Manager can be listed chronologicallyor alphabetically. Refer to Sorting Files in the Site/Drive/LogManager on page 108.2. Press [MENU].3. Use the arrow key to scroll to View and press [ENTER].4. Use the arrow key to scroll to Details and press [ENTER]. A screensimilar to Figure 38 on page 87 appears.5. When you are done viewing the log details, press [F3] (Exit).
