Chapter 5. Logging DataModel PM880 Portable Hygrometer User’s Manual 835.3 Starting or Restarting a LogThe Start and Start All Logs commands enable you to restart a paused logor start a pending log.Note: You cannot restart a log that is completed or ended using the Endcommand.Use the following steps to start or restart one or more logs:5.3.0a Accessing the Log Manager1. If the menu is not active, press [MENU].2. Use the arrow key to scroll to Logging and press [ENTER].3. Use the arrow key to scroll to Log Manager and press [ENTER].5.3.0b Selecting a Log File1. Use the arrow key to scroll to the desired log.Note: The list of log files in the Log Manager can be listed chronologicallyor alphabetically. Refer to Sorting Files in the Site/Drive/LogManager on page 108.2. Press [MENU].3. Use the arrow key to scroll to Log and press [ENTER].4. Use the arrow key to scroll to Start or Start All Logs and press[ENTER].The PM880 returns to the Log Manager, which displays the selected log asRunning or Pending.Next, do one of the following:• To start or restart another log, repeat the above steps.• To return to taking measurements, press [F3] (Exit) and then press[MENU].
