Chapter 7. Using the PM880 with a PC and Printer124 Model PM880 Portable Hygrometer User’s Manual7.4 Printing Reports (cont.)Next, do one of the following:• If desired, repeat steps 4 through 6 to print another report.• To exit and return to taking measurements, press [F3] (Exit) and thenpress [MENU].7.5 Transferring a File To a PCYou can use the Site Manager, Drive Manager or the Log Manager totransfer files to your PC. The Site Manager enables you to transfer site filesonly; the Drive Manager enables you to transfer any file in the PM880; and,the Log Manager enables you to transfer log files only.Use the steps below to transfer files to your PC:7.5.0a Preparing for File Transfer1. The PM880 IR function is already setup for IrDA infraredcommunication. To change IR settings, refer to Setting Up PM880 IRCommunications on page 110.2. If you are using Windows NT 4.0, open the QuickBeam ® software.Proceed to the next section.7.5.0b Accessing the Site, Drive or Log Manager1. If the menu is not active, press [MENU].2. To transfer:• site, meter, log or snapshot files, press Site and press [ENTER].• log files only, press Logging and press [ENTER].3. Use the arrow key to scroll to:• Site Manager and press [ENTER] - to transfer site files only.• Drive Manager and press [ENTER] - to transfer all types of files.• Log Manager and press [ENTER] - to transfer log files only.
