Chapter 4. Using Special FeaturesModel PM880 Portable Hygrometer User’s Manual 494.4 Adding a Message to a Site FileThe Site Manager has a command that enables you to enter a message ordescription for each site file (up to 30 characters). The Site Managerdisplays the site message with the other file information. Use the followingsteps to add a site message:4.4.1 Accessing the Site Manager1. If the menu is not active, press [MENU].2. Use the arrow key to scroll to Site and press [ENTER].3. Use the arrow key to scroll to Site Manager and press [ENTER].4.4.2 Selecting a Site File1. Use the arrow key to scroll to the desired site.Note: The list of site files in the Site Manager can be listed chronologicallyor alphabetically. Refer to Sorting Files in the Site/Drive/LogManager on page 108.2. Press [MENU].3. Use the arrow key to scroll to Site and press [ENTER].4. Use the arrow key to scroll to Message and press [ENTER].4.4.3 Entering a Site Message1. Press [F1] (Delete) to delete any unwanted letters or numbers. Use thearrow keys to scroll to the desired letter or number and press [ENTER].To change case or use special characters, press [SEL] to change thecharacter pages.2. Repeat this procedure until you have created the desired site message.3. When you have finished, press [F3] (OK).New site information is displayed when the site is selected in Site Manager.4. Press [F3] (Exit).
