GE PS978STSS Owner's Manual

Also see for PS978STSS: Use and care manual Owner's manual Installation instructions Features

Contents

GEAppliances.comiAWARNINGiA CAUTIONSocketRecep_a_@_IGlass cover(on some models)i k i ' x ¸¸SHOCK OR BURN HAZARD: Before replacing oven light bulb, disconnectthe electrical power to the range at the main fuse or circuit breaker panel.Failure to do so may result in electric shock or burn.i BURN HAZARD: The glass cover and bulb should be removed when cool.Touching hot glass with bare hands or a damp cloth can cause burns.Oven Light Replacement Ion some models)To remove:E_ Turn the glass cover counterclockwise 1/4turn until the tubs of the glass cover clearthe grooves of the socket. Wearing latexgloves may offer a better grip.[] Using gloves or a dry cloth, remove thebulb by pulling it straight out.To replace:[Z] use a new 120/130-volt halogen bulb, notto exceed 50 watts. Replace the bulb withthe same type of bulb that was removed.Your model will have one of the two typesshown on the left. To determine thecorrect replacement bulb, check the bulbterminals. Bulbs with 2 straight pinterminals are G6,35 bulbs. Bulbs with 2looped terminals are G9 bulbs. (Do notinterchange.) Be sure the replacementbulb is rated !20 volts or !30 volts (NOT!2volts).r21Using gloves or a dry cloth, remove thebulb from its packaging. Do not touch thebulb with bare fingers. Oil from skin willdamage the bulb and shorten its life.Recegloves or@%Pushthe bulb straight into the receptacleall the way.Placethe tabs of the glass cover into thegrooves of the socket.Turn the glass coverclockwise 1/4 turn.For improved lighting inside the oven,clean the glass cover frequently using awet cloth. This should be done when theoven is completely cool.[] Reconnect electrical power to the oven.Glass cover(on some models)iiii_ I_ i _ _i i i i iiiOven Light Replacement Ion some models)To remove:rf] Turn the glass cover counterclockwise 1/4turn until the tabs of the glass cover clearthe grooves of the socket. Wearing latexgloves may offer a better grip.r2] Removethe bulb by turning it counter-clockwise.To replace:[] Placethe tabs of the glass cover into thegrooves of the socket. Turn the glasscover clockwise 1/4 turn.For improved lighting inside the oven, clean theglass cover frequently using a wet cloth. Thisshould be done when the oven is completelycool.[] Reconnect electrical power to the oven.Eli Replacebulb with a new 40-wattappliance bulb. Insert the bulb and turn itclockwise until it is tight. 29