Gaggenau BO8 1 2 Series User Manual And Installation Instructions

Also see for BO47 1 2 Series: User manual and installation instructions

Home Connect en23a Once the food reaches the core temperature thathas been set, a signal tone sounds.a The appliance ends the cooking process automatic-ally.8. Press to confirm.9. Turn the function selector to .Changing the set core temperature1. Press .2. Use the rotary selector to change the set core tem-perature for the food and press to confirm.Deleting the set core temperature1. Press .2. Use to delete the set core temperature.a The appliance continues heating in normal cookingoperation.Home Connect16 Home ConnectThis appliance is network-capable. Connecting your ap-pliance to a mobile device lets you control its functionsvia the Home Connect app, adjust its basic settingsand monitor its operating status.The Home Connect services are not available in everycountry. The availability of the Home Connect functiondepends on the availability of Home Connect servicesin your country. You can find information about this at:www.home-connect.com.The Home Connect app guides you through the entirelogin process. Follow the instructions in the Home Con-nect app to configure the settings.Tip: Please also follow the instructions in theHome Connect app.Notes¡ Please note the safety precautions in this instructionmanual and make sure that they are also observedwhen operating the appliance via the Home Con-nect app.→ "Safety", Page 2¡ Operating the appliance on the appliance itself al-ways takes priority. During this time it is not possibleto operate the appliance using the Home Connectapp.¡ In networked standby mode, the appliance requiresa maximum of 2 W.16.1 Setting up the Home Connect app1. Install the Home Connect app on your mobiledevice.2. Start the Home Connect app and set up access forHome Connect.The Home Connect app guides you through the en-tire login process.16.2 Setting up Home ConnectRequirements¡ The appliance is connected to the power supply andis switched on.¡ You have a mobile device with a current version ofthe iOS or Android operating system, e.g. a smart-phone.¡ The Home Connect app has been installed on yourmobile device.¡ The appliance is receiving signals from the WLANhome network (Wi-Fi) at its installation location.¡ The mobile device and the appliance are withinrange of your home network's Wi-Fi signal.1. Open the Home Connect app and scan the follow-ing QR code.2. Follow the instructions in the Home Connect app.16.3 Home Connect settingsYou can adjust the Home Connect settings and network settings in your appliance's basic settings.Which settings the display shows will depend on whether Home Connect has been set up and whether the applianceis connected to your home network.Symbol Basic setting Possible settings ExplanationConnection type LANWi-FiYou can switch between connection types (LAN cableand Wi-Fi). Follow the instructions for setting up the rel-evant connection type.Connection ConnectDisconnectYou can switch the network connection on or off as re-quired. The network information is retained after the ap-pliance is switched off. After switching on the appliance,wait for a few seconds until it reconnects to the network.Note: In networked standby mode, the appliance re-quires a maximum of 2 W.