en Troubleshooting30the pyrolytic self-cleaning switch-off time, e.g. if youwant the pyrolytic self-cleaning function to runovernight.19.1 Preparing pyrolytic self-cleaningWARNING ‒ Risk of fire!Loose food remnants, fat and meat juices may catchfire.▶ Before using the cleaning function, always removethe worst of the food residues and remnants fromthe cooking compartment and accessories.1. Wipe the cooking compartment with a damp cloth.2. Wipe the door sill and the insides of the doors.3. Completely remove all traces of cleaning agents.4. Remove all loose objects from the cooking compart-ment.The shelf supports are pyrolysis-resistant.→ "Preparing the cleaning of accessories with thepyrolytic self-cleaning function", Page 305. Ensure that the cover is located in the bush for theadditional heating element at the rear of the cookingcompartment.19.2 Preparing the cleaning of accessorieswith the pyrolytic self-cleaning functionGAGGENAU Baking trays and grill trays are coatedwith a pyrolysis-safe enamel. Only clean GAGGENAUbaking trays and grill trays with the pyrolytic self-clean-ing function.WARNING ‒ Risk of fire!Loose food remnants, fat and meat juices may catchfire.▶ Before using the cleaning function, always removethe worst of the food residues and remnants fromthe cooking compartment and accessories.ATTENTION!The heat during the pyrolytic self-cleaning may damagecertain accessories.▶ Do not clean the wire rack, rotisserie spit, castroaster, core temperature probe, baking stone orother accessories using the pyrolytic self-cleaningfunction.▶ Only clean GAGGENAU baking trays and grill trayswith the pyrolytic self-cleaning function.Notes¡ The stainless steel bushes on grill trays may be-come discoloured during pyrolytic self-cleaning. Thisdiscolouration does not affect their usability.¡ If the cooking compartment is extremely dirty, cleanthe baking tray or grill tray separately.1. In each case, only slide one baking tray or grill trayonto the lowest shelf.2. Slide the baking tray or grill tray in as far as it willgo.19.3 Starting the pyrolytic self-cleaningfunction1. Remove all loose objects from the cooking compart-ment and remove coarse dirt.2. Completely remove any cleaning agent residue.3. Turn the function selector to .a lights up.4. Press to confirm.a The display shows the switch-off time at which thepyrolytic self-cleaning function will be finished.5. If required, you can use the rotary selector to delaythe switch-off time.6. Press to confirm.7. Press to start.The total duration of the pyrolytic self-cleaning func-tion comprises the cleaning time and coolingperiod. The time for the relevant section of the pyro-lytic self-cleaning function counts down on the dis-play.a For your safety, the appliance locks the appliancedoor. During cooling, the appliance unlocks thedoor opening mechanism as soon as the temperat-ure has fallen below 200 °C.a The cleaning time counts down on the display.a If you have delayed the switch-off time, the time untilthe pyrolytic self-cleaning function starts countsdown on the display.a The light in the cooking compartment remainsswitched off.a A signal tone sounds once the pyrolytic self-clean-ing function has ended.a The display shows a message.8. Once the appliance has cooled down, wipe out theash that has been left behind in the cooking com-partment with a damp cloth.Depending on the type and degree of soiling, whitedeposits may remain on the enamel surfaces. Thesedeposits are harmless. They do not affect the func-tion or service life of your appliance.Troubleshooting20 TroubleshootingYou can rectify minor faults on your appliance yourself.Read the troubleshooting information before contactingafter-sales service. This will avoid unnecessary costs.WARNING ‒ Risk of injury!Improper repairs are dangerous.▶ Repairs to the appliance should only be carried outby trained specialist staff.▶ If the appliance is defective, call Customer Service.→ "Customer Service", Page 57