Gaggenau BO8 1 2 Series User Manual And Installation Instructions

Also see for BO47 1 2 Series: User manual and installation instructions

Basic settings en2516.6 Remote diagnosticsCustomer Service can use Remote Diagnostics to ac-cess your appliance if you contact them, have your ap-pliance connected to the Home Connect server and ifRemote Diagnostics is available in the country in whichyou are using the appliance.Tip: For further information and details about the avail-ability of Remote Diagnostics in your country, pleasevisit the service/support section of your local website:www.home-connect.com.16.7 Data protectionPlease see the information on data protection.The first time your appliance is registered on a homenetwork connected to the Internet, your appliance willtransmit the following types of data to theHome Connect server (initial registration):¡ Unique appliance identification (consisting of appli-ance codes as well as the MAC address of the Wi-Ficommunication module installed).¡ Security certificate of the Wi-Fi communication mod-ule (to ensure a secure data connection).¡ The current software and hardware version of yourappliance.¡ Status of any previous reset to factory settings.This initial registration prepares the Home Connectfunctions for use and is only required when you want touse the Home Connect functions for the first time.Note: Please note that the Home Connect functionscan only be utilised with the Home Connect app. In-formation on data protection can be retrieved in theHome Connect app.Basic settings17 Basic settingsYou can configure the basic settings for your appliance to meet your needs.17.1 Overview of the basic settingsHere you can find an overview of the basic settings and factory settings. The basic settings depend on the featuresof your appliance.Display Basic setting Selection DescriptionBrightness Levels 1, 2, 3, 4, 51, 6, 7, 8 Set the display brightness.Standby screen On1Off¡ Clock¡ Clock + GAGGENAU logo1¡ Date¡ Date + GAGGENAU logo¡ Clock + date¡ Clock + date + GAG-GENAUlogoAppearance of the standby screenOff: No display. You can use this set-ting to reduce the standby energy con-sumption of your appliance.On: Multiple screens can be adjusted.Press to confirm "On" and use therotary selector to select the requiredscreen.Display screen Reduced1Standard"Reduced": After a short time, the dis-play shows only the most important in-formation.Touch field colour Grey1WhiteSelect the colour of the symbols on thetouch fields.Touch field tone type Tone 11Tone 2OffPress a touch field to select a signaltone.Touch field tonevolumeLevels 1, 2, 3, 4, 51, 6, 7, 8 Set the volume of the touch field tone.Rapid heating On1OffDuring rapid heating, the cooking com-partment reaches the required temper-ature particularly quickly.Heating up signal On1OffThe signal tone sounds when the appli-ance reaches the required temperaturewhen heating up.1 Factory setting (may vary according to model)