Gaggenau BS 474 610 Use And Care Manual

Also see for BS 474 610: Use and care manual Installation instructions

Gaggenau BS 474 610 Use And Care Manual Manual pdf 17 page image

17Confirm with ™.The appliance enters the standby mode and thestandby display appears. The appliance is now readyfor operation.Calibrate the appliance before steaming for the firsttime. The appliance sets the boiling point.CalibratingThe boiling point of water depends on barometricpressure. As air pressure drops with increasingelevation, the boiling point drops as well. Duringcalibration, the appliance sets the boiling point to thepressure conditions at the place where it is installed.It is important for the appliance to steam for20 minutes at 212° F (100°C) without interruption. Donot open the appliance door during this time.Notes‒ Calibrate the appliance only when it is cold.‒ During calibration, the appliance generates moresteam than it normally would do.1 Set the function selector to S.2 Select "Basic settings" using the rotary selector.3 Touch the ™ symbol.4 Select "Calibration" using the rotary selector.5 Touch the % symbol.6 Remove all accessories from the oven interior andtouch the ™ symbol.7 The duration of 20:00 minutes appears. Touch Ito start calibration.Calibration begins. The elapsing time is shown on thedisplay.Note: Do not interrupt calibration. Do not turn thefunction selector. Do not open the appliance door.A message appears in the display once calibration hasended. Touch ™ to confirm and turn the functionselector to 0.After a removalRepeat calibration so that the appliance willautomatically adapt again to the new location.After resetting to factory settingsAfter resetting to factory settings in the basic settingsmenu the appliance has to be recalibrated.After a power failureThe appliance saves the calibration settings, evenafter a power failure or a disconnection from themains. It need not be recalibrated.Grease filterHook the enclosed grease filter onto the hot air grill inthe side wall of the cooking compartment.Remove the left slide-in rail first (see section entitledRemoving slide-in rails).Leave the grease filter in the cooking compartment forall applications. Clean the grease filter with hot soapywater or in the dishwasher every time heavy dirtdeposits have been left behind after cooking.Cleaning accessoriesBefore using accessories for the first time, thoroughlyclean them with hot soapy water and a soft dish cloth.,QLWLDOVHWXSFRPSOHWH3OHDVHFDOLEUDWHWKHDSSOLDQFHEHIRUHILUVWFRRNLQJ&DOLEUDWLRQ&$/&$/