Gaggenau BS 474 610 Use And Care Manual

Also see for BS 474 610: Use and care manual Installation instructions

Gaggenau BS 474 610 Use And Care Manual Manual pdf 37 page image

37cloth. Use a spray bottle filled with water and asoft, clean sponge or cloth for rinsing.9 CAUTIONNever heat up the steam oven with descaleror descaling residues in the cookingcompartment! This will lead to staining!8 Re-insert the side plate. Re-attach the greasefilter and the slide-in rail.9 The rinsing cycle appears. Touch I to start. Theappliance rinses. The rinsing time elapses on thedisplay.10 A signal sounds after 3 minutes. Confirm with ™ .The descaling program has ended. Delete thedescaling cue in the display. Confirm with ™.Wipe the door seal with a clean, damp cloth. Dry thecooking compartment by wiping it with a soft clothand dry thoroughly with the drying program.Removing slide-in racksYou can remove the slide-in racks for cleaning.Removing slide-in racks1 Place a dishcloth in the oven interior to protectthe stainless steel against scratches.2 Undo the knurled nuts (Figure A).3 Pull away the slide-in racks slightly sideward fromthe screw and pull it out toward you (Figure B).You can clean the slide-in racks in a dishwasher.Hooking in slide-in racks1 Fit slide-in racks the right way round: they bottomat the back.2 Push the slide-in racks onto the bolt at the rearand then hook them in at the front.3 Tighten the knurled nuts.Note: If you should lose a knurled nut, you canreorder it as a spare part from our after-sales service.Using knurled nuts other than the original ones willcause corrosion in the oven interior.5LQVHF\FOH_$ %