Gaggenau BS 474 610 Use And Care Manual

Also see for BS 474 610: Use and care manual Installation instructions

Gaggenau BS 474 610 Use And Care Manual Manual pdf 32 page image

32Factory settingIn the factory settings, you can adapt your applianceindividually.1 Set the program selector to S.2 Select "Factory setting" with the rotary selector.3 Touch the ™ symbol.4 Set the required factory setting with the rotaryselector.5 Touch the % symbol.6 Set the factory setting with the rotary selector.7 Save with ™ or cancel with ' and quit thecurrent factory setting.8 Turn the program selector to 0 to quit the factorysetting menu.Changes are saved.Basic setting Possible settings ExplanationBrightness Stages 1, 2, 3, 4, 5*, 6, 7, 8 Setting display brightnessStandby screen On*/Off- Clock- Clock + GAGGENAU logo*- Date- Date + GAGGENAU logo- Clock + date- Clock + date + GAGGENAU logoAppearance of the standby screen.Off: no display. Use this setting to reducethe standby consumption of your appliance.On: several displays can be set, confirm"On" with ™ and choose the desired dis-play with the rotary selector.The selection is displayed.Display screen Minimized*/Standard When Minimized is set, only the mostimportant details are displayed after a shorttime.Touchpad color Gray*/White Select the color of symbols on the touch-padsTouchpad tone Tone 1*/Tone 2/Off Select the signal tone when touching atouchpadTouchpad volume Levels 1, 2, 3, 4, 5*, 6, 7, 8 Sets the volume of the touchpad tonePreheating signal On*/Off The signal tone sounds when the requiredtemperature is reached during preheating.Signal volume Levels 1, 2, 3, 4, 5*, 6, 7, 8 Sets the volume of the signal toneWater filter Available* / not available Available: use appliance with water filter.Not available: use appliance without waterfilter.Water filter capacity 100 - 9000 liters Set the water filter capacityWater hardness 1-18 Check mains water with the included car-bon hardness test. Set the measured waterhardness.Calibration Calibrating the appliance Setting the boiling point