Garland MWE2W Installation, Operation & Service Manual
Also see for MWE1S: STEPS FOR PROGRAMMING GRILL RECOVERY CLEANINGProgramming instructionsProgramming Instruction
                                                                                              | |
Contents
|
INSTALLATION/OPERATION & SERVICE MANUAL - 1&2 PLATEN GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITIONPage 34OPERATING PROCEDURES (continued)Indicator LightsThe LED lights on the main control indicate thetemperature status of each zone.Electric grills have (4) zones per section , TOP, (platen),BACK GRILL, MIDDLE GRILL, and FRONT GRILL.Gas grills have (2) zones per section , TOP, (platen),and GRILL.RED – The zone(s) is “TOO HOT” (more than 79˚F/43˚C overset temperature) OR a heat zone failure has occurred.AMBER – The zone(s) is calling for heat.GREEN – The zone(s) is at or above set temperature, butbelow 79˚F/43˚C over set temperature.Standby ModeTo enter the standby mode:1. Press the button. The upper platen will lower, andthe grill will maintain a set temperature of Upper platen- 425˚ F (218˚C), Grill Surface - 350˚ F (177˚C).To Exit the standby Mode:1. Press the GREEN or ( GREEN & BLACK) push-button(s). The upper platen will raise.To display the current temperatures:1. Press the button and repeat for each zone to bedisplayed:1st key press – Front Set Point2nd key press – Front Actual3rd key press – Mid Set Point4th key press – Mid Actual5th key press – Back Set Point6th key press – Back Actual7th key press – Platen Set Point8th key press – Platen Actual2. Pressing and holding the button for five (5) secondswill display all of the current temperatures at once.Breakfast In Manual mode1. Select AM mode. Press and hold the button.2. Select Manual mode. Press and hold the the button.3. Select a product from the AM product library using theor arrow buttons.4. Following McDonalds procedures for the item selected,load product on the grill.5. Press the GREEN or ( GREEN & BLACK) push-button(s) to initiate a cook cycle.6. Alarm will sound when the cook cycle is complete.7. Remove product and clean grill to prepare for the nextcook cycle.Lunch In Manual modeNote: Switching from breakfast to lunch menu items willtake approximately 10 minutes to heat to the appropriatetemperatures.1. Select PM mode. Press and hold the button.2. Select Manual mode. Press and hold the button.3. Select a product from the PM product library using theor arrow buttons.4. Following the below lay pattern, load product on thegrill.5. Press the GREEN or ( GREEN & BLACK) push-button(s) to initiate a cook cycle.6. Alarm will sound when the cook cycle is complete7. Remove product and clean grill to prepare for nextcook cycle.To Change The Cook Time for a Menu Item1. Select AM or PM mode. Press and hold the button.2. Select Manual mode. Press and hold the button.3. Select a product using the or arrow buttons.4. PRESS the button to display the cook time.5. Use the and buttons to change the cook time.6. The control will automatically default back to thenormal operating mode after 3 seconds.Breakfast In Auto mode1. Select AM mode. Press and hold the button.2. Select Auto mode. Press and hold the button. Thecontrol will display “AM / AUTOMATIC”3. Following McDonalds procedures for the item selected,load product on the grill.4. Press the GREEN or ( GREEN & BLACK) push-button(s) to initiate a cook cycle. The platen will lower,and recognize the product that has been loaded on thegrill.5. Alarm will sound when the cook cycle is complete.6. Remove product and clean grill to prepare for the nextcook cycle. |
Related manuals for Garland MWE1S
manualsdatabase
Your AI-powered manual search engine