10 Edge ™ 205/305 Owner’s ManualGETTING STARTEDPosition the EdgeFor best results, position theEdge with the face orientedtoward the sky. This positionallows the GPS antenna toacquire satellite informationquickly.You can install the bike mountto the stem or handlebars. Thestem installation (shown here)provides a more sturdy location.The optional wedge should beused under the mount for a betterviewing angle.To install the Edge on yourbike stem:1. Place the wedge on the bikestem, and then place the bikemount on the wedge. Makesure the release lever is onthe left.wedge(optional)bike mountreleaseleverFor horizontal bars: Separateand remove the top part of themount, turn it 90 degrees, andreplace. Continue with step 2.For bars with a diameter lessthan 1 in (25.4 mm): Place theadditional rubber pad underthe bike mount to increase thediameter of the bar. The rubberpad also keeps the mount fromslipping. Continue with step 2.