6 - WPT PAGES122 190-00356-00 Rev BAfter selecting the Approach Channel, the WAASapproach ID will be shown in the top left corner ofthe map display.To select an approach channel from the AirportApproach Page:1. Press MENU to dsplay the Arport ApproachPage Optons.2. Turn the small or large right knob to hghlght“Select Approach Chnl? and then press ENT.3. Turn the small right knob to change valuesand the large right knob to move the cursor.After selectng the WAAS approach channel,press ENT.4. Select the desred transton and press ENT.Select Next FPL Apt?As described earlier in this section.Select Destination Apt?As described earlier in this section.Airport Arrival PageThe airport arrival page shows the available AirportStandard Terminal Arrival (STAR) procedures forthe selected airport. Where multiple transitions orrunways are associated with the arrival procedure,that information may also be displayed. A map imageprovides a layout diagram for each arrival, transitionand runway.ArrivalProcedure NameAirport Identifier,Symbol and Type Map ImageFifth Pagein WPT groupTransitionsRunways Associatedwith ArrivalTo scroll through the available arrivals:1. Press the small right knob to actvate thecursor.2. Turn the large right knob to place the cursoron the arrval procedure name field.3. Turn the small right knob to dsplay a wndowof avalable arrvals for the selected arport.Contnue turnng the small right knob toselect the desred arrval.Airport Arrivals
