4 - FLIGHT PLANS73190-00356-00 Rev BActive Flight Plan5. Press the small right knob to remove thecursor.To restore factory default settings for data fieldson the active flight plan page:1. Wth the actve flght plan page dsplayed, pressMENU to dsplay the actve flght plan pageoptons wndow.2. Turn the large right knob to hghlght“Restore Defaults?” and press ENT.Active Flight Plan OptionsThe following options (some covered on the pre-ceding pages) are available for the active flight plan:• Activate Leg• Crossfill• Copy Flight Plan• Invert Flight Plan• Delete Flight Plan• Select Approach• Select Arrival• Select Departure• Remove Approach• Remove Arrival• Remove Departure• Closest Point of Flight Plan• Parallel Track• Change Fields• Restore DefaultsActivate LegActivate Leg? activates/reactivates the flight planand selects the highlighted leg as the “active leg” (theleg which will currently be used for navigation guid-ance).To activate a flight plan along a specific leg:1. Press the small right knob to actvate thecursor and turn the large rght knob to hghlghtthe desred destnaton waypont.2. Select the “Actvate Leg?” opton from theactve flght plan page optons and pressENT.3. A confrmaton wndow wll appear. Wth“Actvate?” hghlghted, press ENT.CrossfillCrossfill? allows you to transfer the active flightplan between two 400W- or 500W-series Garmin unitsin a dual unit installation. See the description on aprevious page in the Flight Plan section.Copy Flight PlanCopy Flight Plan? copies the active flight planto a flight plan catalog location. The copy functionis useful for duplicating the active flight plan beforemaking changes. This feature is described earlier inthis section.Invert Flight PlanInvert Flight Plan? reverses the active flight plan.This feature is described earlier in this section.1. Wth the Actve Flght Plan Page dsplayed,press MENU to dsplay the Actve Flght PlanPage Optons wndow.2. Turn the large right knob to hghlght “InvertFlght Plan?” and press ENT.
