9 - AUX PAGES159190-00356-00 Rev BUtility Pageservice for LPV approach availability.An “INTEG” annunciation at the bottom left corner of thescreen indicates that satellite coverage is insufficient to passbuilt-in receiver autonomous integrity monitoring (RAIM)tests. When this occurs, the GPS receiver will continue toprovide navigation information, but should not be used forprimary navigation guidance. Use the GNS 430W’s VLOCreceiver or another suitable navigation source.Sunrise / Sunset— allows you to calculate the timeof sunrise and sunset at any waypoint or your pres-ent position for a specified date.Software Versions — provides software ver-sion information for the operating software withinthe GPS receiver, COM transceiver, VOR/localizerreceiver, glideslope receiver and main processorboard.Database Versions — The Database VersionsPage displays the current Jeppesen database type,effective date, and expiration date, along with theversion and type of built-in land database.Terrain Database Versions — The TerrainDatabase Versions Page displays the current terrainand obstacle database types, version, cycle, effectivedate, and expiration date.ChecklistsTo create a checklist:1. Select “Checklst” from the utlty page. PressENT to dsplay a lst of checklsts.2. Press MENU to dsplay an optons menu. Turnthe large right knob to select “Create NewChecklst?” and press ENT.3. Use the small and large right knobs to enterthe name of a checklst. Press ENT when fin-shed. (Up to nne dfferent checklsts can becreated and stored n the 400W-seres unt.)4. Use the small and large right knobs to entereach checklst tem, followed each tme byENT. (Each checklst may contan up to 30 lnetems of as much as sxteen characters long.)To execute a checklist:1. Wth the checklsts page dsplayed, turn thelarge right knob to select the desred checklstand press ENT.
