15TAKEOFF TOUR190-00356-00 Rev BNavCom PageFrom the default NAV page, simply turn the smallright knob to display the map page and again to dis-play the NAVCOM page. The NAVCOM page displaysthe available frequencies (communications and naviga-tion) for the departure airport, any en route airportsthat are included in your flight plan, and the finaldestination airport. When using the direct-to function,frequencies will be listed for the airport nearest to yourstarting position and the destination airport.A frequency listed on the NAVCOM page can bequickly transferred to the standby field of the COMor VLOC windows. This time-saving process preventshaving to “re-key” a frequency already displayed else-where on the screen.To display the frequency list for the active flightplan or direct-to airport:1. In the Nav functon, turn the small right knobto reach the NAVCOM page.2. Push the small right knob to actvate thecursor on the arport dentfier field (n theGPS wndow). Turn the small right knob todsplay the lst of arports (departure, arrvaland en route) for your flght plan or drect-to.Contnue to turn the small right knob untlthe desred arport s selected.3. Press ENT to dsplay the frequency lst for theselected arport.Press ENT to show the frequencies for theselected airport.To select a communication or navigation fre-quency:1. On the NAVCOM page, push the small rightknob to actvate the cursor n the GPS wn-dow.2. Turn the large right knob to select the desredfrequency from the lst.Selecting a frequency on the NAVCOM page.3. Press ENT to transfer the selected frequency tothe standby field n the COM or VLOC wndow.COM frequences wll automatcally go to thestandby field of the COM wndow and navgatonfrequences wll automatcally go to the standbyfield of the VLOC wndow, regardless of whchwndow s currently hghlghted by the cursor.4. To actvate the selected frequency, press theCOM flip-flop (or VLOC flip-flop) key.Swap the standby COM frequency into theactive Com frequency location.NAVCOM Page
