Trail Guide ™ Owner’s Manual ENcustomIzInG your traIl GuIde > chanGInG the tracK setupChanging the Track SetupAs you travel, the Trail Guide automatically records your pathin the track log, creating an electronic “bread crumb” trail. Thisfeature can be enabled or disabled from the Track Setup page. Bydefault, it is enabled.Press MenU twice, highlight Track Setup, and press OK.Track Recording—select enabled to record tracks or Disabled tostop tracks from being recorded.Wrap When Full—select On to allow new track points to replacethe oldest track points once the log is full. If set to Off, no newtracks are added until the track log is cleared.Record Interval—sets the interval at which track points arerecorded. With Auto, track points are recorded using a formula andthe setting you choose in the Resolution field.Resolution—selects the frequency at which you want track pointsto be recorded based on how you set Record Interval (above).Higher resolutions cause the track log to fill up more quickly.Percentage Full—shows the percentage of track memory used.Clear Track—clears all of the points of the track log.To restore these settings, press MenU, highlight Restore Settings,and press OK.
