InspectionsTest the Control Lever (for SX)7 Using the control lever, momentarily raise andlower the boom, extend and retract the boom.Result: All functions should operate smoothly.8 Using the control lever and the red button,momentarily tilt the forks up and tilt the forksdown.Result: The function should operate smoothly.9 Using the control lever 4, momentarily lock andunlock the attachment (OPTIONAL).Result: The function should operate smoothly.Test the Control Lever (for EX)10 Using the control lever, momentarily raise andlower the boom, tilt the forks up and tilt theforks down.Result: All functions should operate smoothly.11 Using the yellow roller, momentarily extend andretract the boom.Result: The function should operate smoothly.12 Pressing the white button and moving thecontrol lever, momentarily lock and unlock theattachment.Result: The function should operate smoothly.Tests1 Select a test area that is firm, level and freeof obstruction. Be sure there is no load on theforks or attachment.2 Enter the operator's compartment and sit on theseat.3 Fasten the seat belt.4 Adjust all the mirrors. See par “Adjusting theMirrors” in the Operating Instructions section.5 Be sure the parking brake is on and thetransmission control is in neutral.6 Start the engine. See par. “Starting theEngine” in the Operating Instructions section.FUNDAMENTAL FUNCTION TESTSKnow and understand the function tests beforegoing on to the next section.The function tests are designed to discover anymalfunctions before the machine is put into service.The operator must follow the step-by-step instructionsto test all machine functions. A malfunctioningmachine must never be used. If malfunctions arediscovered, the machine must be tagged and removedfrom service. Repairs to the machine may only bemade by a qualified service technician, according tothe manufacturer's specifications. After repairs arecompleted, the operator must perform a pre-operationinspection and function tests again before putting themachine into service.Make sure:You learn and practice the principles of safemachine operation contained in this operator’smanual.1 Avoid hazardous situations.2 Always perform a pre-operationinspection.3 Always perform function tests prior to use.4 Inspect the workplace.5 Only use the machine as it was intended.Operator’s ManualPart No. 57.0009.0540 GTH-4013 SX - GTH-4017 SX - GTH-4013 EX - GTH-4017 EX 71First Edition - Second PrintingCourtesy of Crane.Market
