ROAD OR SITE TRANSFERWhen travelling on public roads, strictly obey thelocal or national road traffic regulations.Besides, take into account the following generalprecautions: Start the engine. Align the rear wheels. Sway the machine. Only for the italian market install the lockingdevices provided for the machine registrationdocument as follows:1. install the boom extension locking cable A;2. install the locking collar B on the tilting cylinder;3. install the locking collar C on the lifting cylinder;4. install the locking chain D on the outriggers arms.5. Cover the teeth of the conventional forks withthe special guard; or withdraw the floating forks.NOTICEW i t h t h e f l o a t i n gforks pitched back,do not move the forkpitching cylinder asthe machine couldsuffer from damage. Retract the boom and the attachment totransfer position. Set the Road/Jobsite switch to “ROAD”. Make sure that lights, horn and turn signalsare in working order. Engage the gear. The transfer speed of the vehicle will dependon the engine rpm and the position of the controllever.Operating InstructionsABCDNOTICEPublic road circulation is allowed only fortransferring an unloaded machine.Do not use the machine to tow trailers.ONLY FOR THE ITALIAN MARKETOperator’s Manual90 GTH-4013 SX - GTH-4017 SX - GTH-4013 EX - GTH-4017 EX Part No. 57.0009.0540First Edition - Second PrintingCourtesy of Crane.Market
