Turn the ignition key and start the handler. Disconnect the cables. Remove first thenegative terminal from the frame earth, then from thebooster supply. Disconnect the positive terminal fromthe machine battery, then from the booster supply.DANGERUse only a 12V battery; other devices like batterychargers, etc. may cause an explosion of thebattery or result in damage to the electricalsystem.LOW TEMPERATURE STARTINGIn case of cold starting, use an oil with a SAE viscosityadequate to the ambient temperature.Please refer to the engine use and maintenancemanual.The machine is supplied with oil SAE 15W/40.To start the engine from cold, proceed as follows: Set the forward/back speed lever to neutralposition. Turn the ignition switch to the glow plugspreheating position holding it in this position for fewseconds. Step down on the gas pedal and start theengine by turning the ignition switch. Release theswitch as soon as the engine fires. Let the engine run at idle for a few secondsbefore putting a gear; this allows for a gradual warmup of the engine oil and a better lubrication.Operating InstructionsOperator’s ManualPart No. 57.0009.0540 GTH-4013 SX - GTH-4017 SX - GTH-4013 EX - GTH-4017 EX 81First Edition - Second PrintingCourtesy of Crane.Market
