Operation Manual – IP Address and PerformanceH3C S3100-52P Ethernet Switch Chapter 1 IP Addressing Configuration1-6II. Network diagramFigure 1-4 Network diagram for IP address configurationIII. Configuration procedure# Assign a primary IP address and a secondary IP address to VLAN-interface 1. system-view[Switch] interface Vlan-interface 1[Switch-Vlan-interface1] ip address 172.16.1.1 255.255.255.0[Switch-Vlan-interface1] ip address 172.16.2.1 255.255.255.0 sub# Set the gateway address to 172.16.1.1 on the PCs attached to the subnet172.16.1.0/24, and to 172.16.2.1 on the PCs attached to the subnet 172.16.2.0/24.# Ping a host on the subnet 172.16.1.0/24 from the switch to check the connectivity. ping 172.16.1.2PING 172.16.1.2: 56 data bytes, press CTRL_C to breakReply from 172.16.1.2: bytes=56 Sequence=1 ttl=255 time=25 msReply from 172.16.1.2: bytes=56 Sequence=2 ttl=255 time=27 msReply from 172.16.1.2: bytes=56 Sequence=3 ttl=255 time=26 msReply from 172.16.1.2: bytes=56 Sequence=4 ttl=255 time=26 msReply from 172.16.1.2: bytes=56 Sequence=5 ttl=255 time=26 ms--- 172.16.1.2 ping statistics ---5 packet(s) transmitted5 packet(s) received0.00% packet lossround-trip min/avg/max = 25/26/27 ms
