Operation Manual – MAC Address AuthenticationH3C S3100-52P Ethernet switchChapter 1 MAC Address AuthenticationConfiguration1-8Caution:z If both the limit on the number of MAC address authentication users and the limit onthe number of users configured in the port security function are configured for a port,the smaller value of the two configured limits is adopted as the maximum number ofMAC address authentication users allowed to access this port. Refer to the PortSecurity manual for the description on the port security function.z You cannot configure the maximum number of MAC address authentication usersfor a port if any user connected to this port is online.1.5 Displaying and Maintaining MAC Address AuthenticationConfigurationTo do... Use the command... RemarksDisplay global or on-portinformation about MACaddress authenticationdisplay mac-authentication[ interface interface-list ]Available in anyviewClear the statistics ofglobal or on-port MACaddress authenticationreset mac-authenticationstatistics [ interface interface-typeinterface-number ]Available in userview1.6 MAC Address Authentication Configuration ExamplesI. Network requirementsAs illustrated in Figure 1-1, a supplicant is connected to the switch through portEthernet 1/0/2.z MAC address authentication is required on port Ethernet 1/0/2 to control useraccess to the Internet.z All users belong to domain aabbcc.net. The authentication performed is locallyand the MAC address of the PC (00-0d-88-f6-44-c1) is used as both the username and password.II. Network DiagramFigure 1-1 Network diagram for MAC address authentication configuration