139# Commit the settings configured after the configuration commit delay command was executed.[Sysname] configuration commit# Commit the settings configured after the configuration commit delay command was executed. Inthis example, the commit operation fails, because the allowed delay time has expired. The device isrolling back the configuration to the settings before the configuration commit delay command wasexecuted.[Sysname] configuration commitThe system is rolling back configuration. Please wait…configuration commit delayUse configuration commit delay to set the allowed delay time for a manual commit to keep thesettings configured subsequently in effect.Syntaxconfiguration commit delay delay-timeViewsSystem viewPredefined user rolesnetwork-adminParametersdelay-time: Sets the allowed delay time in the range of 1 to 65535 minutes.Usage guidelinesConfigure this command in a single-user environment.If you do not execute the configuration commit command within the delay time, the device rollsback the configuration to the settings before the configuration commit delay command wasexecuted. The device outputs logs to notify the user of the rollback operation. The user cannotperform other operations before the rollback is finished.As a best practice, set the allowed delay time in the following situations:• The user configures the device remotely. The user might be disconnected from the devicebecause of a setting. If the configuration commit delay command is configured and thesetting is not committed, the user can reconnect to the device after the delay time expires.• The user is not familiar with the device configuration. If any parameters are configuredincorrectly, the rollback mechanism can remove the incorrect settings after the delay timeexpires.You can change the allowed delay time before the previous configured delay time expires. The newdelay time configuration overwrites the previous delay time configuration after you enter Y to confirmthe change. The allowed delay time is re-set.Examples# Set the allowed delay time to 10 minutes for a manual commit to keep the settings configuredsubsequently in effect. system-view[Sysname] configuration commit delay 10# Re-set the allowed delay time to 60 minutes for a manual commit to keep the settings configuredsubsequently in effect.[Sysname] configuration commit delay 60The commit delay already set 10 minutes, overwrite it? [Y/N]:y
