207Field Descriptionthe cable has a problem.• UP—The interface has been enabled by using the undoshutdown command, and its physical status is up.Line protocol current state Link layer status of the interface.The Maximum Transmit Unit MTU of the interface.Inet4 Address IPv4 address of the interface. This field is displayed only whenthe device is configured with an IPv4 address.Inet6 AddressIPv6 global unicast address of the interface. This field isdisplayed only when the device is configured with an IPv6address.Inet6 Address isFE80::202:3FF:FE04:506/10 Scope:Link IPv6 link-local address of the interface.IP Packet FrameType:PKTFMT_ETHNT_2, HardwareAddress: c4ca-d94c-e201Link layer encapsulation type and hardware address for IPv4packets.IPV6 Packet FrameType:PKTFMT_ETHNT_2, HardwareAddress: c4ca-d94c-e201Link layer encapsulation type and hardware address for IPv6packets.Input: 8983 packets, 0 errors, 0 dropped, 0overruns, 2 frameStatistics for received packets:• Total number.• Number of erroneous packets.• Number of dropped packets.• Number of packets encountering queue overflow errors.• Number of packets encountering frame queue errors.Output: 431 packets, 0 errors, 0 dropped, 0overruns, 0 carrier, 0 collisions, 1000txqueuelenStatistics for sent packets:• Total number.• Number of erroneous packets.• Number of dropped packets.• Number of packets encountering queue overflow errors.• Number of packets encountering carrier failures.• Number of packets with collision.• Number of packets permitted by the queue.Input bytes Total number of received bytes.Output bytes Total number of sent bytes.display ip routing-tableUse display ip routing-table to display IPv4 routing information.Syntaxdisplay ip routing-tableViewsAny viewExamples# Display IPv4 routing information. display ip routing-table
