160ViewsUser viewPredefined user rolesnetwork-adminParametersall: Upgrades all the subordinate devices.slot: Specifies the IRF member ID of a subordinate device.Usage guidelinesYou can use this command to synchronize startup images after adding new member devices.The startup images synchronized to the subordinate device are set as main startup images,regardless of whether the source startup images are main or backup.If the master device has started up with main startup images, its main startup images aresynchronized to the subordinate device, regardless of whether any main startup image has beenrespecified.If the master device has started up with backup startup images, its backup startup images aresynchronized to the subordinate device, regardless of whether any backup startup image has beenrespecified.Startup image synchronization fails if any software image being synchronized is not available or hasbeen corrupted.If an ISSU patch installation or software upgrade has been performed, use the install commitcommand to update the set of main startup images on the master before software synchronizationfor startup image consistency between the master and the subordinate device.Examples# Synchronize startup images from the master device to subordinate device 2. boot-loader update slot 2This command will update the specified standby MPU. Continue? [Y/N]:yUpdating. Please wait...Copying main startup software images to slot 2. Please wait...Done.Setting copied images as main startup software images for slot 2...Done.Successfully updated the startup software images of slot 2.Related commands• display boot-loader• install commitbootrom updateUse bootrom update to load the Boot ROM image in the flash to the Normal area of Boot ROM.Syntaxbootrom update file file-url slot slot-number-listViewsUser view
