251Field DescriptionConnector TypeConnector type options:• MPO—Multi-fiber Push On.• LC—1.25 mm/RJ-45 fiber connector developed by Lucent.• RJ-45.Wavelength(nm)• Fiber transceiver: Central wavelength (in nm) of the transmit laser. If thetransceiver supports multiple wavelengths, every two wavelength values areseparated by a comma.• Copper cable: Displayed as N/A.Transfer Distance(xx)Transfer distance, with "xx" representing the distance unit: km (kilometers) forsingle-mode transceiver modules and m (meters) for other transceiver modules.If the transceiver module supports multiple transfer media, the transfer distancesare separated by commas. The transfer medium is included in the bracketfollowing the transfer distance value. The following are the transfer media:• 9 um—9/125 um single-mode fiber.• 50 um—50/125 um multi-mode fiber.• 62.5 um—62.5/125 um multi-mode fiber.• TP—Twisted pair.• CX4—CX4 cable.Digital DiagnosticMonitoringSupport for digital diagnosis:• YES—Supported.• NO—Not supported.Ordering Name Product code.display transceiver manuinfoUse display transceiver manuinfo to display electronic label information for transceiver modules.Syntaxdisplay transceiver manuinfo interface [ interface-type interface-number ]ViewsAny viewPredefined user rolesnetwork-adminnetwork-operatorParametersinterface [ interface-type interface-number ]: Specifies an interface by its type and number. If nointerface is specified, this command displays electronic label information for the transceiver moduleson all interfaces.Usage guidelinesThis command displays only part of the electronic label information.Examples# Display the electronic label information for the transceiver module in interface Ten-GigabitEthernet1/0/4. display transceiver manuinfo interface ten-gigabitethernet 1/0/4Ten-GigabitEthernet1/0/4 transceiver manufacture information:
