245Parametersschedule-name: Specifies a schedule by its name, a case-sensitive string of 1 to 47 characters. Ifyou do not specify this option, the command displays information about all schedules.Examples# Display information about all schedules. display scheduler scheduleSchedule name : shutdownSchedule type : Run once after 0 hours 2 minutesStart time : Tue Dec 27 10:44:42 2011Last execution time : Tue Dec 27 10:44:42 2011Last completion time : Tue Dec 27 10:44:47 2011Execution counts : 1-----------------------------------------------------------------------Job name Last execution statusshutdown SuccessfulTable 42 Command outputField DescriptionSchedule type Execution time setting of the schedule. If no execution time is specified, this field is notdisplayed.Start time Time to execute the schedule for the first time. If no execution time is specified, thisfield is not displayed.Last executiontimeLast time when the schedule was executed. If no execution time is specified, this fieldis not displayed. If the schedule has never been executed, "Yet to be executed" isdisplayed for this field.Last completiontimeLast time when the schedule was completed. If no execution time is specified, this fieldis not displayed.Execution counts Number of times the schedule has been executed. If the schedule has never beenexecuted, this field is not displayed.Job name Name of a job under the schedule.Last executionstatusResult of the most recent execution:• Successful.• Failed.• Waiting—The device is executing the schedule and the job is waiting to beexecuted.• In process—The job is being executed.• -NA-—The execution time has not arrived yet.To view information about whether the commands in the job has been executed andthe execution results, execute the display scheduler logfile command.display system stable stateUse display system stable state to display system stability and status information.Syntaxdisplay system stable state
