65• display role feature-group• rolesuperUse super to obtain another user role without reconnecting to the device.Syntaxsuper [ rolename ]ViewsUser viewPredefined user rolesnetwork-adminParametersrolename: Specifies a user role, a case-sensitive string of 1 to 63 characters. The user role mustexist in the system. If you do not specify a user role, you obtain the default target user role.Usage guidelinesThe obtained user role is a temporary user role, because this command is effective only on thecurrent login. The next time you are logged in with the user account, the original user role settingstake effect.To enable users to obtain another user roles without reconnecting to the device, you must configureuser role authentication.• If no local password is configured in the local password authentication (local), an AUX user canobtain user role authorization by either entering a string or not entering anything.• If no local password is configured in the local-then-remote authentication (local scheme), thefollowing rules apply:{ A VTY user performs remote authentication.{ An AUX user can obtain user role authorization by either entering a string or not enteringanything.Examples# Obtain the user role network-operator. super network-operatorPassword:User privilege role is network-operator, and only those commands can be used that authorizedto the role.Related commands• authentication super (Security Command Reference)• super authentication-mode• super passwordsuper authentication-modeUse super authentication-mode to set an authentication mode for temporary user roleauthorization.Use undo super authentication-mode to restore the default.
