68Parametersrole rolename: Specifies a user role, a case-sensitive string of 1 to 63 characters. The user role mustexist in the system. If you do not specify a user role, the command sets a password for the defaulttarget user role.hash: Sets a hashed password.simple: Sets a plaintext password. This password will be saved in hashed text for security purposes.password: Specifies the password string. This argument is case sensitive.• In non-FIPS mode:{ If the simple keyword is specified, the password must be a string of 1 to 63 characters.{ If the hash keyword is specified, the password must be a string of 1 to 110 characters.• In FIPS mode, the password must be a string of 15 to 63 characters. The string must containfour character types including digits, uppercase letters, lowercase letters, and specialcharacters.Usage guidelinesIf you do not specify any parameters, you specify a plaintext password in the interactive mode.The FIPS mode supports only the interactive mode for setting a password.Set a password if you configure local password authentication for temporary user role authorization.It is a good practice to specify different passwords for different user roles.Examples# Set the password to 123456TESTplat&! for the user role network-operator. system-view[Sysname] super password role network-operator simple 123456TESTplat&!# Set the password to 123456TESTplat&! in the interactive mode for the user role network-operator. system-view[Sysname] super password role network-operatorPassword:Confirm :Related commands• super authentication-mode• super default rolevlan policy denyUse vlan policy deny to enter user role VLAN policy view.Use undo vlan policy deny to restore the default user role VLAN policy.Syntaxvlan policy denyundo vlan policy denyDefaultA user role has access to any VLAN.ViewsUser role view
