191The output shows the SSH feature has been rolled back to the original version. Imageflash:/ssh-feature-a0201.bin has been removed.Related commandsdisplay install rollbackinstall verifyUse install verify to verify the software change confirmation status and software image integrity andconsistency.Syntaxinstall verifyViewsUser viewPredefined user rolesnetwork-adminUsage guidelinesIf some software images are not integral or some activated/deactivated software images are notconfirmed, a switchover might not occur as expected, and the IRF members might run differentversions of software images after a reboot or even cannot reboot correctly.To solve the problem, perform one of the following tasks:• Download and install the software images again to ensure software integrity.• Use the install activate, install deactivate, and install commit commands as appropriate toguarantee software image consistency.Examples# Verify the software change confirmation status and software image integrity and consistency onmember devices. install verifyActive packages on slot 1 are the reference packages.Packages will be compared with the reference packages.This operation will take several minutes, please wait...Verifying packages on slot 1:Start to check active package completeness.flash:/boot-a0101.bin verification successful.flash:/system-a0101.bin verification successful.Start to check active package consistency.Active packages are consistent with committed packages on their own board.Active packages are consistent with the reference packages.Verifying packages on slot 2:Start to check active package completeness.flash:/boot-a0101.bin verification successful.flash:/system-a0101.bin verification successful.Start to check active package consistency.Active packages are consistent with committed packages on their own board.Active packages are consistent with the reference packages.Verification is done.
