H3C SecPath F1000-E Installation Manual

Contents

H3C SecPath F1000-E Installation Manual Manual pdf 110 page image

Installation ManualH3C SecPath F1000-E Firewall Chapter 6 Maintaining Software6-32Enter your choice(0-4):You can set the file type to M (main) or B (backup) or cancel the setting by selecting 1 to4. For details of each type of files, refer to section 6.1 “Overview” on page 6-1.II. Setting application file type through the CLI# Change the type of f1000e.bin from B to M+B. boot-loader file f1000e.bin mainThis command will set the boot file of the specified board. Continue? [Y/N]:The specified file will be used as the main boot file at the next reboot!By now, the type of f1000e.bin has been changed to M+B, and the file has become themain application file for the next startup. If there was an M type of application file, thetype of that file was automatically changed to N.Note:For details about the boot-loader command, refer to H3C SecPath Series SecurityProducts User Manual.6.6.3 Deleting a FileI. Deleting a file on the BootWare menuSelect 3 on the file control submenu, and the system displays:Deleting the file in cfa0:'M' = MAIN 'B' = BACKUP 'S' = SECURE=============================================================NO. Size(B) Time Type Name1 10129712 Apr/11/2007 05:39:50 B cfa0:/main.bin2 1227 May/11/2007 16:25:52 N/A cfa0:/startup.cfg3 2294 May/11/2007 14:47:32 N/A cfa0:/~/startup.cfg4 2094 May/11/2007 13:47:34 N/A cfa0:/~/startup_bac.cfg0 Exit=============================================================Enter file no:Enter the file number, select 4, and the system prompts:The file you selected is cfa0:/~/startup_bac.cfg,Delete it? [Y/N]Select Y, and the system displays the following information:Deleting.........Done!