Installation ManualH3C SecPath F1000-E Firewall Chapter 5 Starting and Configuring the Firewall5-64) The configuration terminal displays information normally. You can see the startupwindow on the local configuration terminal. For more information, see section 5.3“Startup Process” on page 5-6.5) After the power-on self-test (POST), the system prompts you to press Enter.When the command line prompt appears, the firewall is ready to configure.5.3 Startup ProcessAfter power-on, the firewall initializes its memory, and then runs the extendedBootWare. The following information appears on the terminal screen:Note:The information displayed on the terminal may vary with different BootWare versions.System start booting...Booting Normal Extend BootWare....********************************************************* ** H3C SecPath F1000-E BootWare, Version 1.12 ** *********************************************************Copyright (c) 2004-2007 Hangzhou H3C Technologies Co., Ltd.Compiled Date : Jul 27 2007CPU Type : XLR732CPU L1 Cache : 32KBCPU Clock Speed: 1000MHzMemory Type : DDR2 SDRAMMemory Size : 1024MBMemory Speed : 533MHzBootWare Size : 1024KBFlash Size : 4MBcfa0 : 244MBCPLD Version : 135.0PCB Version : Ver.ABootWare Validating...Press Ctrl+B to enter extended boot menu...
