Installation ManualH3C SecPath F1000-E Firewall Chapter 6 Maintaining Software6-35please input old password:Enter the old password.please input old password: ******Note:z If the old password is incorrect, the system will prompt “Wrong password,Pleaseinput password again:”.z You have three chances to enter the correct old password. If you fail to do that, thesystem will halt and prompt “Wrong password,system halt.”.After you enter the correct old password, the system prompts you to enter the samenew password for twice.Please input new password: ******Please input new password again: ******The system displays the following information indicating success of setting the newpassword.Password Set Successfully.6.7.3 Super Password LossThe super password enables you to switch between four super levels. In the case ofsuper password loss, you cannot perform higher level operations.You can clear the super password by selecting 8 on the BootWare main menu.=======================================| <1> Boot System || <2> Enter Serial SubMenu || <3> Enter Ethernet SubMenu || <4> File Control || <5> Modify BootWare Password || <6> Skip Current System Configuration || <7> BootWare Operation Menu || <8> Clear Super Password || <9> Storage Device Operation || <0> Reboot |=============================================================Enter your choice(0-9):8The system displays the following information indicating that you have successfullycleared the super password.
