H3C SecPath F1000-E Installation Manual

Contents

H3C SecPath F1000-E Installation Manual Manual pdf 85 page image

Installation ManualH3C SecPath F1000-E Firewall Chapter 6 Maintaining Software6-7Table 6-1 BootWare main menuMenu item Description<1> Boot System Boot system applications from the CF card<2> Enter Serial SubMenuEnter the serial submenu.For detailed information, refer to section 6.2.2“Serial Submenu” on page 6-7.<3> Enter Ethernet SubMenuEnter the Ethernet submenu.For detailed information, refer to section 6.2.3“Ethernet Submenu” on page 6-8.<4> File ControlFile control submenu.For detailed information, refer to section 6.2.4“File Control Submenu” on page 6-9.<5> Modify BootWare Password Modify the BootWare password.<6> Skip Current SystemConfigurationBoot the system with the system configurationignored.This operation is valid this time, and you need toconfigure it next time.<7> BootWare Operation MenuBootWare operation submenu.For detailed information, refer to section 6.2.5BootWare Operation Submenu.<8> Clear Super PasswordClear the super password.The super password is used in user levelswitching.No super password is set by default.This setting is valid for the first reboot of thefirewall only. The super password will berestored after a second reboot.<9> Storage Device Operation Device control menu, used to select the storagemedium. Reboot Reboot the firewall.6.2.2 Serial SubmenuSelect 2 on the BootWare main menu to enter the serial submenu, where you canupgrade application files through Xmodem.The system displays:============================================|Note:the operating device is cfa0 || <1> Download Application Program To SDRAM And Run || <2> Update Main Application File |