Installation ManualH3C SecPath F1000-E Firewall Chapter 6 Maintaining Software6-156.3.4 Upgrading BootWareEnter the BootWare main menu, refer to section 6.2.1 “BootWare Main Menu“ on page6-5. Select 7 to enter the BootWare operation submenu, where you can perform allBootWare operations. For detailed description on this submenu, refer to section 6.2.5“BootWare Operation Submenu“ on page 6-9.The following example shows how to upgrade the full BootWare:First modify the baud rate to improve the upgrading speed (refer to section 6.3.2“Modifying Serial Interface Parameters“ on page 6-11), and then select 3 on theBootWare operation submenu. The system prompts:=========================| <1> Update Full BootWare || <2> Update Extended BootWare || <3> Update Basic BootWare || <4> Modify Serial Interface Parameter || <0> Exit To Main Menu |=============================================================Enter your choice(0-4):Select 1, the system displays the following:Waiting ...CCCCCCCCCCCCCCCCCCCCCCCCC...Select Transfer > Send file… in the terminal window. The following dialog boxappears:Figure 6-7 Send File dialog boxClick Browse… to select the application file to be downloaded, and select Xmodemfrom the Protocol drop-down list. Then click Send and the following dialog boxappears:
