H3C SecPath F1000-E Installation Manual

Contents

H3C SecPath F1000-E Installation Manual Manual pdf 114 page image

Installation ManualH3C SecPath F1000-E Firewall Chapter 6 Maintaining Software6-36Clear Application Password SuccessNote:z Select option 8, quit the menu, reboot the firewall, and then you can enter systemview directly.z This setting (password clearing) is valid only for the first reboot of the firewall. Thesuper password will be restored after a second reboot.6.8 Backing Up and Restoring BootWareSelect 7 on the BootWare main menu to enter the BootWare operation submenu. Referto section 6.2.5 “BootWare Operation Submenu” on page 6-9 for details.6.8.1 Backing Up the Full BootWareI. Backing up the full BootWare using BootWare menu optionsTo backup a full BootWare, you need to backup the basic segment and then theextended segment.Select 1 on the BootWare operation submenu, and the system prompts:Will you backup the Basic BootWare? [Y/N]Select Y:Begin to backup the Basic BootWare....................Done!At this moment, backup for the basic segment is finished.The system continues to prompt:Will you backup the Extend BootWare? [Y/N]Select Y:Begin to backup the Extend BootWare....................Done!At this moment, backup for the extended segment is finished.Note:Both the basic and extended BootWare are backed up to the Flash.