3 - 8 Quick Check® 600/800 Series User’s Guide♦ To select an application:1. Display the menu that begins with Print Results (press POWER andSELECT).2. Set the cursor on the asterisk next to Change Settings and then pressSELECT.A menu that begins with Specifications appears.3. With the asterisk next to Specifications, press SELECT.A menu that begins with Symbologies appears.A list containing the term Symbologies and the names of the applicationsappears. The application that is currently enabled has a ← to the right of thename. If a → is to the right of the term Symbologies, no application is enabled.4. To enable another application, set the cursor next to the application nameand then press SELECT.• When you select AIAG, SCC, Coupon Code orBOOKLAND, you are prompted to provide additionalinformation. AIAG asks if you want Supplier or Customer. Use ↑ and↓ to set the cursor on the asterisk next to the term you want and thenpress SELECT.• When you select SCC for the SCS/ITF, Coupon Code and BOOK-LAND, you are prompted to provide a magnification factor. Use ↑ and↓ to display the magnification factor you want to use and then pressSELECT.5. To return to the previous menu, press POWER.To scan a symbol, set the wand on the symbol’s quiet zone.Changing the Test CriteriaThe test criteria apply to the standards used to evaluate the scanned symbols.You can select the following items:• ISO/IEC scan grade or pass/fail criteria for traditional parameters• Character averaged decodability or ISO/IEC Decodability• ISO/IEC grades in letters or numbers• Number of scans used to determine the final ISO/IEC Symbol GradeScan GradeThe Quick Check 600/800 Verifier acquires data using the ScanProfileMethodology specified in the ISO/IEC’s “Bar Code Print Quality Guideline.” Theverifier then evaluates the acquired data and provides a scan grade (also calleda scan profile grade).The default number of scans used to obtain the scan grade is one (with ExtendedAccuracy set to Off). You can obtain an averaged scan grade when theExtended Accuracy scanning option is On (set to a value >1).