Quick Check® 600/800 Series User’s Guide 3 - 13Additional results you can display and the criteria used include:• Symbol type• Wide-to-narrow ratio (traditional)• Light reflectance (traditional and ISO/IEC)• Dark reflectance (traditional and ISO/IEC)• Symbol contrast (ISO/IEC)• Reflectance minimum/maximum (ISO/IEC)• Edge contrast minimum (ISO/IEC)• Defects (ISO/IEC)• Message length• Bar growth (traditional)Error override allows you to set the verifier to replace the default or user-selectedUpper and Lower Parameter Result lines with any error information or messagesthat might result from the bar code scan analysis. If more than two errors resultfrom a scan, the first two appear on the display and you can scroll the display toview the other errors. The default for Error Override is NO.When you select ISO/IEC criteria, you can use the LED’s display feature to setthe LEDs to indicate bar growth/loss or pass/fail grade and result grade. Inaddition, when you select ISO/IEC criteria, the five multi-colored LEDs normallyindicate symbol pass or fail based on the ISO/IEC criteria. With the LED featureset to Bar Growth, the LEDs provide information on bar growth or loss, just asthey would if you selected traditional pass/fail test criteria.Print OptionsThe print options allow you to select:• Printer type (QCP or QCHSP)• Printout form (long or short)• Automatic options — automatically print data when the unit is connected to aprinter and turned on, automatically store data when the unit is not connectedto a printer• Auto Print/Store with or without ProfileYou can use any one of the three optional accessory hardcopy printers, but youneed to select the printer before you try to print. Supported printers include:• QCP (standard printer)• QCHSP (High-Speed Printer)Refer toChapter 5, Saving and Printing for more information about theseprinters.AutoPrint/StoreThe AutoPrint/Store option automatically prints or stores your data:• When you have the AutoPrint/Store feature turned on and a printer connectedto your verifier and turned on, your scan results print automatically. Youcannot store results when a printer is connected and turned on.