5 - 2 Quick Check® 600/800 Series User’s Guide♦ To check the print buffer during operation:1. Display the menu that begins with Print Results.If scan results are displayed on the verifier, press SELECT.If a menu (for example, a change setting menu) is displayed on the verifier,press POWER repeatedly.2. Press POWER.3. Press ↑.The on-demand print buffer display screen appears. The display providesthe percent of the memory used for the stored records and the number ofscan records in the memory. You can respond in one of three ways: a.)Cont., b.) Prnt or c.) Cir. The cursor is at the asterisk next to Continue.3.a To continue obtaining scan results, press SELECT. The openingdisplay appears. You can then scan a symbol.3.b To print the stored records, press → to place the cursor on theasterisk next to Print. Then press SELECT. The stored recordsprint. Once printed, the stored results are removed from the verifier’smemory; however, the results from the last scan remain in the buffer.(Press ← to display the last scan’s results.)3.c To clear (delete) the records stored in the memory, press →twice to place the cursor on the asterisk next to Clear and then pressSELECT. The stored results and the results from the last scan aredeleted from the verifier’s memory.Printing DataWhen a printer is attached to the verifier and turned on, you can print the currentscan results stored in the buffer. For this discussion, “current data” are data froma scan that you just took and whose results are on the verifier’s display, or datafrom a scan that you will perform momentarily. “Stored data” are scan recordsstored or saved in the buffer. There are two ways to print current data — usingthe AutoPrint/Store feature or through the Print Results menu. There are alsotwo methods to print stored data — through the Print Results menu or throughthe Print Buffer menu.To print results, the Printer type (QCP or QCHSP) in the Printer Options menumust match the type of printer you have connected to the verifier. If theconnected printer and the displayed printer abbreviation do not match, theprintout will be illegible.♦ To print current data:1. Connect the verifier and the printer and turn on both units. Be sure thePrinter type setting in the Output Options, Print Options menu matches thetype of printer to which the verifier is connected. Refer to "Changing the Out-put Options" on page 3-12 for instructions.