Hand Held Products Quick Check Bar Code Verifiers 800 User Manual

Contents

5 - 4 Quick Check® 600/800 Series User’s Guide♦ To delete stored data:1. Connect your printer to the verifier and turn on both units.The opening display appears.2. A PRINT BUFFER message appears asking if you want to continue, print orclear.3. Press ↓ and then → to move the cursor next to Clear.4. Press SELECT.The results stored in the verifier and the data from the last scan are deleted.If you don’t want to clear the stored results, move the cursor next to Cont andpress SELECT.OR1. Connect your printer to the verifier and turn on both units.The opening display appears.2. When you select the Print Results menu, a menu appears asking if you wantto print All Stored Results, the Latest Stored Results Only or Clear Buffer!.3. Press ↓ to move to select Clear Buffer!.4. Press SELECT.The results stored in the verifier and the data from the last scan are deleted.If you don’t want to clear the stored results, move the cursor next to Cont andpress SELECT.Interfacing With a ComputerYou can use the QCViewerII software and print to a local or network printer, orconnect the verifier to an RS-232 serial communication device using the largerport on the back of the unit and a QCDB09F cable. If you have the appropriatecomputer software, you can display the verifier data on your computer. ContactHand Held Products for additional information about connecting the verifier to acomputer.Reviewing the PrintoutsAll the information presented on the printout is also available on the display afteryou scan a bar code symbol. Refer toChapter 4, Reviewing Scan Data forinformation on displaying this data.