Quick Check® 600/800 Series User’s Guide 4 - 17If you save your customized default results, the unit automatically enters thesechanges in the Output Options, Display Options line. To change the upper andlower result lines using the Display Options menu, refer to "Changing the OutputOptions" on page 3-12.If you customize the display, you can use the SSTR Codes to review the dataquickly. You can also use the Default SSTR Code to return thedisplay to its factory default settings.♦ To quickly review data using SSTR Codes:1. Scan a symbol2. Scan the SSTR Code that contains the parameter result you want to review.The parameter result appears on the lower line of the display.To review scan results not available using a SSTR Code (check character,error messages and calculating X), use the verifier’s arrow buttons to selectthem. Refer to “Reviewing Scan Results” on page 4-1 for instructions onreviewing data manually.♦ To customize the result display:1. Scan the Install UpperLine SSTR Code.The message Upper Line Result—INSTALL— appears.2. Scan the SSTR Code for the result that you want displayed on the upper lineafter a scan.3. Scan the Install LowerLine SSTR Code.The message Lower Line Result—INSTALL— appears.4. Scan the SSTR Code for the result that you want displayed on the lower lineafter a scan.5. Scan the Save Settings SSTR Code twice.After you scan this code once, the message —CONFIRM— Scan Again forYES appears.To save the display results, rescan the Save Settings Code. If you don’twant to save the results, scan any other code.♦ To return the customized display to the default display:1. Scan the Default SSTR Code.After you scan a symbol, the default display appears. If you set the test crite-ria option to ISO/IEC, it has the ISO/IEC defaults; if you set the test criteria toTraditional, it has the traditional defaults.Using the Quick Check Verifier as a ReflectometerYour verifier is capable of functioning as a static reflectometer. This capability isespecially useful to investigate the underlying reflectance characteristics of barcode symbols or for testing the reflectance of potential bar (for example, ink) andspace (for example, substrate) components.