IBM 436854u - System x3200 M2 5U Mini Tower Server User Manual

Also see for 4367BDU: Brochure & specs

Contents

If you have other devices to install or remove, do so now; otherwise, go to“Completing the installation.”Completing the installationTo complete the installation, you must reinstall the two-piece bezel, reinstall the sidecover, connect all the cables and, for some devices, run the Configuration/SetupUtility program. Follow the instructions in this section.Reinstalling the two-piece bezelTo reinstall the two-piece bezel, complete the following steps:1. Install the upper bezel on the front of the server chassis:a. Insert the two right-side tabs on the upper bezel into the matching holes onthe right side of the chassis.b. Rotate the upper bezel to the left side of the chassis and press the bezelclips into the matching indentations on the left side of the chassis until thebezel clips snap into place.52 System x3200 M2 Types 4367 and 4368: User’s Guide